Collection:
Individual Sensors, Probes, & Harnesses
15 products
Engine Sensor Main Wire Harness, 6' long, for EMS/FlightDEK/SkyVIew
(included in respective EMSKITs)
EGT/CHT Wire Harnesses, 6' long, for EMS/FlightDEK/SkyView
(included in respective EMSKITs)
Fuel Flow Transducer, 1/4" Female NPT, EI FT-60, .6-70+ GPH
Up to 350 HP engines, engine-driven fuel pumps only.
Red anodized aluminum body, 5.3 ounces.
1/4” female NPT, 1.375 in. (height) x 1.620 in. (width) x 1.90 in. (length)
.6 to 70+ GPH, .6 PSI drop ...
Fuel/Fluid Pressure Sender - Kavlico v2, 1/8-27 NPT, 15 PSI
Used in most carbureted fuel systems with 0.6–15 PSI requirements.If needed, purchase this to replace the outdated 101690-000: Carbureted Fuel/Fluid Pressure Sender - Kavlico, 1/8-27 NPT, 15 PSI
Oil/Fuel/Coolant/Fluid Pressure Sender - Kavlico v2, 1/8-27 NPT, 150 PSI
Used for most injected fuel systems and oil systems with 6–150 PSI requirements.
EMS-D10, EMS-D120, and FlightDEK-D180 Firmware Note:
The EMS-D10, EMS-D120, and FlightDEK-D180 require firmware v5....
CHT, Bayonet 3/8-24 UNF, Lycoming/Continental/Superior
Note: This probe is not compatible with Advanced Flight displays unless equipped with an SV-EMS-220/221.
CHT, Ring Terminal, 12mm, Jabiru
Note: This probe is not compatible with Advanced Flight displays unless equipped with an SV-EMS-220/221.
EGT, Hose Clamp, 0.75-1.25", Rotax
Note: This probe is not compatible with Advanced Flight displays unless equipped with an SV-EMS-220/221.
EGT, Hose Clamp, 1.00-1.75", Jabiru
Note: This probe is not compatible with Advanced Flight displays unless equipped with an SV-EMS-220/221.
EGT - Hose Clamp
Note: This probe is not compatible with Advanced Flight displays unless equipped with an SV-EMS-220/221.
Ungrounded EGT - Hose Clamp (Legacy AFS)
Ungrounded EGT Probed (up to 2.25" diameter tubing)
Compatibility:
Works with Legacy AF-2000, AF-3000, AF-4000 series.
Works with Legacy AF-5000 series (with Internal EMS)
Manufactured by Electro...
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device